StrongARM SA-1100 based PDAs running GNU/Linux (like the Yopy, or many iPaq s once you replace that other OS with Linux) will network through the usbnet host side driver.
To fix that, rebuild and reinstall as appropriate; at this time you might also want to upgrade to a recent kernel.Usb0: register usbnet usb-00:02.0-1.3, Belkin, eTEK, or compatible, c2:91:27:cb:d7:29 Of course, that might also say "SA-1100 Linux Device" or "Zaurus" if you are using such a PDA, or identify some other hardware.(Read more about the ietf Zero Configuration teach yourself russian book Networking working group.) A "leaf" type system might use zcip something like this: # # modify /etc/hotplug/ent to add a new case: # case interface in usb # picks address on 169.254/16, reserved for zeroconf #.With Windows XP 64 bit).Rndis based devices rndis Recent Linux kernels (2.6.14 and later) include experimental support for the rndis protocol.Many people will be familiar with PDAs running Linux, discussed later in this section, but the embedded system doesn't need to be a PDA.I've had the best luck with the designs used by Belkin and NetChip.It turns out that MCT stands for Magic Control Technologies.Linux kernels include a standard ieee 802 (Ethernet) Bridging module, using the Spanning Tree Protocol (STP) to interoperate with commercial Ethernet bridge and switch products.There are multiple options for transferring files between PCs or Laptops, and your first instinct may be to turn to your USB memory stick or wireless network.Eventually I thought hmm, lets just see if we can find another USB232 converter that used a Philips chip.Traditional, ethernet Adapters such as the high-speed (USB.0) asix 8817x based products.In our example, we use and this should work for you as well.It was then that I discovered that Belkin dont even write their own drivers but use Magic Control Technologies drivers! .This originally used separate driver, but then it merged with "usbnet".Please do yourself a favor and order one of these if you want to use a cable with Total Commander.When USB Devices run Linux, not USB Hosts Any embedded Linux system could use this same IP-over-USB approach if it acts as a USB "Device not a USB "Host".Ethernet Adapters In addition to the "software emulated" adapter model used in smart peripherals, there are also single-purpose adapters using real hardware.The result was a second driver for everything mentioned above.The ARM Linux "usb-eth" driver and SA-1100 USB stack haven't needed such nonstandard changes.(On some USB hosts, queueing USB transfers is more expensive than the packet merging.) Zaurus.
Hence I began searching to see if anyone had got the device working.
You can literally making.